4.9

(37 Ratings & Reviews)

We clean it all, big or small.

Serving All of South Eastern Mass.

Norton, MA

Cleaning crew working on the production floor of a Massachusetts manufacturing facility
Factory & Plant Cleaning

Manufacturing Facility Cleaning Services in Massachusetts

Production floors, machine areas, overhead structures and plant offices, cleaned by an insured, background-checked crew that works around your shifts instead of stopping your line.

4.9 Customer Rating
Family-Owned Since 2011
Fully Insured & Bonded
Serving: NortonMansfieldBrocktonTauntonCantonStoughtonAttleboroFoxboroughEastonFranklinAll of Massachusetts
Crew member degreasing the floor around production equipment
Production Floors & Machine Areas
Factory & Plant Cleaning

A Cleaning Partner That Understands a Working Plant

A manufacturing floor is not an office. There is oil and coolant on the concrete, fine dust in the air, forklifts in the aisles and a production schedule that does not stop for a mop bucket. Cleaning it well takes the right equipment, the right chemistry and a crew that knows how to stay out of the way.

MC Cleaning Service has been cleaning commercial and industrial buildings across Massachusetts since 2011. For manufacturers, that means production floors, machine areas, overhead structures, docks and the offices attached to them, handled by one crew on one schedule.

4.9★Customer Rating
2011Family-Owned Since
W-2Employees, Not Subcontractors
What We Clean

Manufacturing Facility Cleaning Services

Six services that cover a plant from the dock door to the front office. Take all of them or only the ones you need.

Production Floor Cleaning

Large-format concrete and epoxy floors scrubbed with walk-behind or ride-on autoscrubbers, so aisles and work cells stay clean, visible and safe to walk.

  • Autoscrubbing of aisles and work cells
  • Dust and debris removal
  • Safety line and walkway visibility
  • Recurring or one-time service

Machine Area Degreasing

Oil, coolant and grime build up on the floor around production equipment. We degrease the floor and surrounding surfaces so the area around each machine stays clean.

  • Floor degreasing around equipment
  • Machine bases, guards and exterior surfaces
  • Drip and overspray zones
  • Coordinated with your maintenance lead

High Dusting

Dust on rafters, ductwork, pipes and light fixtures eventually ends up on your product and your floor. We remove it with extension equipment and HEPA-filtration vacuums.

  • Rafters, trusses and beams
  • Ductwork, conduit and piping
  • Light fixtures and ledges
  • HEPA-filtration vacuums

Loading Docks & Shipping

Docks and staging zones take the heaviest traffic in the building. We keep them swept, scrubbed and clear of packaging debris.

  • Dock floors and bays
  • Staging and receiving areas
  • Packaging and pallet debris
  • Entry points and walk-off areas

Plant Offices, Break Rooms & Restrooms

The front of the plant gets the same attention as the floor. Offices, locker rooms, break rooms and restrooms are cleaned and restocked on your schedule.

  • Restroom cleaning and sanitizing
  • Break room and locker room care
  • Office and conference room cleaning
  • Trash and recycling removal

Shutdown & Deep Cleans

Planned shutdowns are the best time for the work that cannot happen during production. We bring a larger crew and clear the list while the line is down.

  • Top-to-bottom facility deep clean
  • Hard-to-reach areas opened up by the shutdown
  • Floor scrubbing wall to wall
  • Ready before production restarts
Zone by Zone

Every Part of the Plant Has Its Own Soil

A single cleaning routine does not work across a whole facility. This is how we approach each zone.

Production Floor

Concrete and epoxy scrubbed on a set frequency so dust, chips and tracked-in grime do not build into a slip hazard.

Machine Areas

Degreasing of the floor and exterior surfaces around equipment, where oil and coolant collect first.

Overhead Structures

Rafters, ducts, pipes and fixtures dusted with HEPA-filtration vacuums before the dust falls on product.

Maintenance Bays

Heavy-soil floors and work surfaces degreased and reset so your maintenance team starts clean.

Docks & Staging

High-traffic concrete swept and scrubbed, with packaging debris cleared from bays and receiving areas.

Offices & Welfare Areas

Restrooms, locker rooms, break rooms and offices cleaned and restocked to the same standard as any office we service.

Overhead Cleaning

The Dust You Cannot See From the Floor

Look up in most plants and you will find years of dust sitting on trusses, ductwork and light fixtures. Vibration and airflow bring it down a little at a time, onto product, into equipment and across a floor that was just cleaned.

High dusting removes it at the source. Our crews use extension equipment and HEPA-filtration vacuums to capture dust instead of pushing it into the air, working section by section so the floor below stays in use.

  • Rafters, trusses, beams and joists
  • Ductwork, conduit and overhead piping
  • Light fixtures, ledges and sills
  • Scheduled to follow your production calendar
High dusting of rafters and ductwork in an industrial facility
Scheduling

Cleaning That Works Around Your Shifts

Downtime costs more than cleaning ever will. We fit the work into the gaps you already have.

1

Between Shifts

Short, focused visits during changeover: restrooms, break rooms, trash and the main aisles, done before the next crew clocks in.

2

Overnight & Weekends

Full floor scrubbing, degreasing and office cleaning while the building is quiet, so the plant opens clean.

3

Planned Shutdowns

A larger crew for the deep work: high dusting, wall-to-wall floor scrubbing and the areas that are only reachable when the line is down.

MC Cleaning Service team serving Massachusetts manufacturing facilities
Why MC Cleaning

Why Massachusetts Manufacturers Choose MC

You are letting a cleaning crew into a building full of expensive equipment and active hazards. Who they are matters as much as what they clean.

Our crews are W-2 employees, not subcontractors. They are background-checked and trained, and the same crew returns on each visit, so they learn your floor, your safety rules and the areas your team cares about most.

  • Family-owned and operated since 2011
  • Fully insured and bonded
  • W-2, background-checked, trained crews
  • We bring all equipment and supplies
  • Month-to-month service, no long-term contract
  • Free on-site walkthrough and written scope

Industrial Cleaning Across Massachusetts

From our base in Norton, MC Cleaning Service cleans plants, warehouses and commercial buildings across Southeastern Massachusetts and takes on larger industrial accounts throughout the state.

4.9★Customer Rating
2011Family-Owned Since
15+Cities Served
W-2Background-Checked Crews
Common Questions

Manufacturing Facility Cleaning FAQ

What does manufacturing facility cleaning include?+
It covers the whole building, not just the offices: production floor scrubbing, degreasing around machine areas, high dusting of rafters and ductwork, loading docks, and the restrooms, break rooms and offices your team uses every day. We build the scope around your facility after a walkthrough.
What is the difference between industrial and commercial cleaning?+
Commercial cleaning covers spaces like offices, retail and medical suites. Industrial cleaning deals with production environments: larger floors, heavier soil such as oil and metal dust, overhead structures, and active equipment and forklift traffic. It calls for autoscrubbers, degreasers, HEPA-filtration vacuums and crews trained to work safely on a plant floor.
Do you clean the production machinery itself?+
Our crews clean and degrease the floors and surfaces around your equipment, including machine bases, guards and exterior surfaces your maintenance lead approves. Internal machine servicing, tank cleaning and confined-space work belong with a specialized industrial contractor. Tell us what you need and we will tell you plainly what we cover.
Can you clean without interrupting production?+
Yes. Most plants schedule us between shifts, overnight, on weekends or during planned shutdowns. We agree the schedule and the zones with you in advance so cleaning never gets in the way of the line.
What equipment do you use?+
We bring everything: walk-behind and ride-on autoscrubbers for concrete and epoxy floors, HEPA-filtration vacuums, extension equipment for high dusting, pressure washing systems and commercial-grade degreasers. You do not supply a thing.
How much does manufacturing facility cleaning cost?+
Every job is quoted after a walkthrough of your space, so the number reflects your square footage, floor types, soil level and schedule. Contact us for a free quote.
Do you require a long-term contract?+
No. Recurring service is month-to-month, with no long-term contract required. One-time deep cleans and shutdown cleans are quoted as individual projects.
What areas of Massachusetts do you serve?+
We are based in Norton and serve manufacturers across Southeastern Massachusetts, including Mansfield, Taunton, Attleboro, Brockton, Canton, Stoughton, Foxborough, Easton and Franklin, and we take on larger industrial accounts throughout the state. See our service area for details.

Ready for a Cleaner, Safer Plant?

Tell us about your facility and your shift schedule. We will walk the floor with you and put a cleaning plan in writing.

Get a Free Quote
Family-owned · Norton, MA · See our service area