Commercial Floor Cleaning, Stripping and Waxing in Massachusetts
Autoscrubbing for warehouse concrete and epoxy. Stripping, waxing and buffing for VCT and vinyl. One crew, the right method for each floor, scheduled when your building is quiet.

The Floor Is the First Thing People Judge
Customers notice a dull, scuffed corridor before they notice anything else. On a warehouse floor the stakes are higher: dust, oil and tire marks are a slip hazard and a sign nobody is looking after the building.
Different floors need different care. Sealed concrete is scrubbed. Epoxy is scrubbed with the right chemistry so the coating is not dulled. VCT and vinyl are protected with floor finish that has to be maintained, recoated and eventually stripped. MC Cleaning Service handles all of it, and has since 2011.
The Right Method for the Floor You Have
Using the wrong process on a floor wastes money at best and damages the surface at worst. Here is how we treat the three floors we see most.

Sealed & Bare Concrete
The standard warehouse and plant floor. It is swept and autoscrubbed, never waxed.
- Sweep and autoscrub
- Degreasing of oil and spill areas
- Tire mark removal
- Dust control in aisles

Epoxy & Coated Floors
Durable and easy to clean, as long as the chemistry and pads do not dull the coating.
- Autoscrubbing with suitable cleaners
- Non-aggressive pads
- Spill and residue removal
- Keeps coatings bright and safe

VCT, Vinyl & Linoleum
Found in offices, corridors, break rooms and retail. Protected by floor finish that needs upkeep.
- Strip and wax
- Scrub and recoat
- Buffing and polishing
- Edge and corner detailing
Commercial & Warehouse Floor Cleaning Services
From a one-time restoration to a standing maintenance plan.
Autoscrubbing
Walk-behind and ride-on autoscrubbers clean large concrete and epoxy floors in a single pass, scrubbing and recovering the dirty water as they go.
- Warehouse aisles and open floor
- Production and staging areas
- Docks and receiving bays
- Recurring programs available
Degreasing & Tire Mark Removal
Oil spots, grease and forklift tire marks do not come up with a standard scrub. We treat them with commercial-grade degreasers and the right pad for the surface.
- Oil and grease spots
- Forklift and pallet jack tire marks
- Tracked-in grime at dock doors
- Spot treatment or full-floor
Floor Stripping & Waxing
When finish has yellowed, scuffed through or built up at the edges, we strip the floor back to the tile and lay fresh coats of finish for an even, protective shine.
- Old finish fully removed
- Edges and corners detailed
- Multiple coats of new finish
- VCT, vinyl and linoleum
Scrub and Recoat
A lighter option between full strips. We deep scrub the top layer of finish and apply fresh coats, restoring the gloss without taking the floor back to bare tile.
- Removes embedded surface soil
- Fresh top coats of finish
- Less disruption than a full strip
- Extends time between strips
Buffing & Polishing
Regular buffing keeps finished floors glossy and hardens the surface against scuffs, so lobbies, corridors and sales floors keep looking maintained.
- High-traffic corridors and lobbies
- Retail and showroom floors
- Scuff and heel mark removal
- Scheduled with routine cleaning
Recurring Floor Maintenance
Floors last longer on a plan. We set the scrub, buff and recoat frequency for each area of your building and keep to it.
- Frequency set by traffic level
- One plan for every floor type
- Same crew each visit
- Month-to-month service
Not Every Dull Floor Needs a Full Strip and Wax
Two processes that are often confused. We look at the floor and recommend the smaller job whenever it will do.
Scrub and Recoat
When the finish is dull but intactWe deep scrub the top layer of finish to remove embedded soil, then apply fresh coats. The floor gets its gloss back and the existing finish keeps protecting the tile.
- Faster, with less disruption
- Restores shine in traffic lanes
- Extends the time between full strips
Strip and Wax
When the finish is worn through, yellowed or built upWe remove every layer of old finish down to the bare tile, detail the edges and corners, and rebuild the floor with multiple new coats.
- Removes yellowing and edge buildup
- Resets the floor to a uniform finish
- The starting point for a new maintenance plan
From Walkthrough to Finished Floor
Walk the Floor
We look at the floor type, the condition of any finish, the soil and the traffic, and measure the area.
Written Scope
You get a clear quote that names the process for each area. No hidden fees.
Clear and Clean
We work after hours, protect adjacent areas and complete the floor section by section.
Ready to Use
Before we leave we tell you when the floor is ready for foot traffic, and set up a maintenance plan if you want one.
Floor Care From a Crew You Already Trust in the Building
Floor work happens when nobody is around, so it comes down to trust and to results you can see the next morning.
Our crews are W-2 employees who are background-checked and trained on the equipment they run. We bring the autoscrubbers, buffers, pads and finish. And because we also handle janitorial, warehouse and office cleaning, your floor plan can sit inside one service agreement.
- Family-owned and operated since 2011
- Fully insured and bonded
- W-2, background-checked, trained crews
- All equipment and supplies provided
- After-hours and weekend scheduling
- Satisfaction guaranteed

Floor Care Across Massachusetts
From Norton and Mansfield to Taunton, Brockton and beyond, MC Cleaning Service keeps warehouse, office and retail floors clean, safe and presentable.
Commercial Floor Cleaning FAQ
What is the best way to clean a warehouse floor?+
How often should warehouse floors be cleaned?+
How often should commercial floors be stripped and waxed?+
How do I know if my floor needs stripping or just scrubbing?+
How long does it take to strip and wax a floor?+
Is scrubbing a floor better than mopping?+
Can you clean floors after hours or on weekends?+
How much does commercial floor cleaning cost?+
Explore More from MC Cleaning
Floors Looking Tired?
Send us the square footage and the floor type, or just ask for a walkthrough. We will tell you whether it needs a scrub, a recoat or a full strip and wax.